JBL TUNE 510BT Wireless Headphone

40hr Battery · Speed Charge

Battery That Outlasts Your Week

Forty hours of wireless playback is measured at 50% volume — the standard testing condition that most manufacturers apply. At higher listening levels (70–80% volume, typical for commuting in noisy environments), real-world battery life will be lower, generally in the 28–35 hour range depending on listening patterns and Bluetooth transmission activity. At moderate volumes for home and office use, 40 hours is achievable. The practical implication is that most users will charge the Tune 510BT once or twice per week rather than daily — a meaningful reduction in charging friction compared to wireless headphones in the 20–25 hour battery category. Speed Charge uses the USB-C port to deliver a high current burst to the battery in five minutes, restoring approximately 2 hours of playback — enough to rescue a depleted headphone before a commute or gym session without waiting for a full 2-hour charge cycle. The USB-C connector is the current standard across consumer electronics, which means the Tune 510BT charges from the same cable as most Android phones and laptops — no proprietary cable required. Full charge from depleted takes approximately 2 hours.

JBL Pure Bass · 32mm Driver

Sound Built for Music

JBL Pure Bass is the sound tuning philosophy applied consistently across JBL’s consumer headphone and speaker range — a bass-forward signature that prioritises low-frequency impact and extension while maintaining clear midrange for vocal and instrument intelligibility. The 32mm dynamic driver in the Tune 510BT is the primary driver size for JBL’s on-ear headphone range, providing sufficient diaphragm area for meaningful bass output in an on-ear (supra-aural) form factor where the earcup sits on the ear rather than around it. On-ear headphones inherently provide less bass reinforcement than over-ear (circumaural) headphones because the seal is less complete — the smaller contact area between the earcup cushion and the head means more low-frequency leakage compared to an over-ear design. JBL tunes the Tune 510BT’s frequency response to compensate for this characteristic, applying an acoustic boost in the bass range that produces the signature JBL sound in the on-ear form. At 96dB sensitivity and 32Ω impedance, the driver is efficiently powered from any Bluetooth device’s internal amplifier. The frequency range of 20Hz–20kHz covers the full audible spectrum. The on-ear design provides partial passive noise isolation from the earcup pressure — less than a closed-back over-ear headphone but more than an open-back or semi-open design.

BT 5.0 · Multipoint · Foldable

Two Devices, One Headphone

Bluetooth 5.0 multipoint pairing is the Tune 510BT’s most practical feature for users who move between devices during the day. The headphones maintain active Bluetooth connections to two paired devices simultaneously — in practice, a phone and a laptop or tablet — without requiring manual switching. When audio is playing from the laptop and a call comes in on the phone, the Tune 510BT detects the incoming call and switches its audio to the phone automatically, then returns to the laptop audio when the call ends. This eliminates the manual Bluetooth disconnection and reconnection that single-point headphones require when switching between devices. Voice assistant activation — a long-press of the call button — connects to Siri on iPhone or Google Assistant on Android without unlocking the phone, which is useful for calls, reminders, navigation and playback control. The foldable hinge mechanism reduces the earcups to a flat compact form for bag storage and travel. At 160g, the Tune 510BT is lightweight for an on-ear wireless headphone — the adjustable headband distributes weight across the top of the head and the earcup foam provides contact area on the ear, keeping clamping force moderate for comfortable extended wear.

Right choice if you…

✔ Want JBL Pure Bass wireless headphones and maximum battery life at an accessible price
✔ Switch between phone and laptop throughout the day — multipoint keeps both connected simultaneously
✔ Need Speed Charge for busy mornings — 5 minutes gives 2 hours of playback from flat
✔ Want a foldable, portable headphone for commuting and travel at a lightweight 160g

Consider something else if…

✖ You need active noise cancellation — the Tune 510BT has no ANC; passive isolation from on-ear contact only; see the JBL Tune 660NC or 770NC for ANC options
✖ You prefer over-ear (circumaural) comfort — on-ear headphones rest on the ear and can feel warm or pressured after 2–3 hours; over-ear designs sit around the ear
✖ You need LDAC or aptX HD — the Tune 510BT uses SBC and AAC only; no high-resolution Bluetooth codec

Technical Specifications

In the Box

Frequently Asked Questions

Do the JBL Tune 510BT have noise cancellation?

No — the Tune 510BT has no active noise cancellation. The on-ear earcups provide some passive isolation from background noise through physical contact with the ear, but ambient sound remains audible. For ANC, see the JBL Tune 660NC or Tune 770NC, which add active noise cancellation at a higher price point.

How does multipoint pairing work?

Pair the Tune 510BT to two devices — for example, your phone and laptop. The headphones stay actively connected to both simultaneously. Audio plays from whichever device is streaming. When a call comes in on the phone while laptop audio is playing, the headphones switch to the call automatically, then return to the laptop when the call ends. To set up: pair the first device normally, then put the headphones back in pairing mode and pair the second device.

How do I activate voice assistant with the Tune 510BT?

Press and hold the call button (the centre button on the right earcup) for approximately 2 seconds. Siri activates on iPhone, Google Assistant on Android. Release the button and speak your command. The voice assistant responds through the headphone speakers. This works without unlocking your phone.

Is the Tune 510BT comfortable for all-day wear?

The 510BT is comfortable for most users during commuting sessions and 2–3 hour listening periods. On-ear headphones apply pressure directly to the ear, which some users find warm or mildly uncomfortable after extended sessions — the experience varies significantly between individuals. At 160g, weight is not a fatigue factor. Users who plan extended 5–8 hour sessions may prefer an over-ear (circumaural) design where the earcup sits around the ear rather than on it.

Condition

Brand New — Retail Packaging

Warranty

Manufacturer warranty (JBL)

Delivery

4–5 Working Days · Fully Tracked

Also Available at maibo